Tag Archives: China gear coupling elecon

Hino China in Erode India elecon fluid coupling supplier Widely in Lodz Poland rubber gear coupling price Used 6X4 380HP 40ton Trailer Tractor Truck with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Hot selling for HINO brand 700 6×4 tractor head Euro 4

Engine Make:HINO
Diesel 4-stroke EPT control common rail engine
Engine model: P11C-VK, Euro IV emission standard
6-cylinder in-line with water cooling, turbo-charging and intercooling
Maximum output: 350 hp(259kw) at 1900 rpm
Maximum torque: 1488 Nm at 1100-1300 rpm
Number of cylinder: 6
Displacement:10.52 L
Bore: 122 mm
Stroke: 150 mm
Specific fuel consumption: 195 g/kWh
Engine oil filling quantity: 19 l
Cooling system filling quantity (long-term filling): 40 l
Thermostat with 71ºC opening begin
Twin cylinder air compressor
Rigid fan

Transmission EATON FULLER 12JSD160(TA), 12 forwards and 2 reverse, 1600N.m, 2600rpm
Ratio: 15.53 12.08 9.39 7.33 5.73 4.46 3.48 2.71 2.1 1.64 1.28 1 14.86(R1) 3.33(R2)
Propeller Shaft Double universal joint propeller shaft with gear-shaped coupling flange

Front Axle HINO, Steering with doubleT-cross section beam

Rear Axle HINO Pressed axle housing, Pressed axle housing, central single reduction
Ratio:3.9

Brakes Service brake: dual circuit compressed air brake
Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels
Auxiliary brake: engine exhaust brake (WEVB)
Trailer Brake

Fifth wheel Rated loading capacity at fifth wheel: 50,000kg

Wheels & Tyres Tire: 11.00R20, all steel radial tyre

Driver’s Cab Standard cab, with two seats, 2 beds, 2-arm windscreen wiper system with three speeds,
damped adjustable driver’s seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn,
24V USB, air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber, Air suspension dirver seats

Dimensions mm Wheel base 3400+1410
Front wheel track 2060
Rear wheel track 1855
Approach angle (0) 14
Departure angle (0) 30
Overall length 7100
Overall width 2500
Overall height with roof air spoiler 3900
Height of fifth wheel above road 1360
Weight kg Dead weight 9400
Maximum Carry Capacity (kgs) 38600
Gross combination weight (GVW) 48000
Performance Maximum driving speed (km/h) 110
Maximum gradeability (%) 38
Minimum ground clearance (mm) 298
Minimum turning circle (m) 15
Fuel consumption (l/100 km) 34

Contact
Mr. Allen

Company information
CIMC VEHICLES SALES CO., LTD.

CIMC VECHICLE was founded by CIMC group, which fixes the mission to be customers’ partner for modern transportation. CIMC is dedicated to manufacturing and supplying CIMC trucks, CIMC truck body assembly, trailers, tank equipment. Currently, CIMC owns USD 8.8 billion total assets, USD 2.6 billion net assets, USD 8.4 billion annual sales and USD 0.6 billion net profits in 2571, having over 150 subsidiaries and 63, 000 staff across China, North America, Europe, Asia and Australia.

Vehicles: CIMC has over 1000 lines of products in 11 series, including container chassis, flatbed trailer, bulk lorry, tanker, self-dumper, reefer trailer, van, curtain side trailer, mixer, pump truck, car carrier vehicle, fire engine, sanitation vehicle, etc. With the annual output capacity of over 200 thousand units, it now takes the leading position in the world. Up to today, the Group has established 22 production bases.

Heavy Truck: Have its own production C & C brand truck. Other heavy truck CIMC produces the truck body, more than 2, 000 kinds of truck body for different transportation purpose. The truck chassis cooperates with FAW, XIHU (WEST LAKE) DIS.FENG DFAC, SHACMAN, SINOTRUK, FOTON, BEI BEN, JAC, CAMC, ZheJiang HYUNDAI, SAIC-Iveco and so on, include all truck chassis brand production in China.

Welcome global heavy truck dealer to take a sight seeing of trucks, to taste values of “considerate service, benefits share”! Will bring you cost-saving solutions and eye-catching returns!

Contact information

CIMC VEHICLES SALES CO., LTD.
Address: 8floor, Cimc Plaza, No. 10 West HangZhou Rd, HangZhou, ZheJiang , China

Website: yzcimc.en.made-in-china.com

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

Hino China in Erode India elecon fluid coupling supplier Widely in Lodz Poland rubber gear coupling price Used 6X4 380HP 40ton Trailer Tractor Truck with top quality lowest price

Bevel China in Lviv Ukraine elecon fluid coupling factory Gearboxes in Nizhniy Novgorod Russian Federation rexnord gear coupling manufacturer Feature One Input and One Output Shaft. Our Bevel T Gearboxes Feature One Shaft That Extends From Both Sides of The Body, Forming a T Shape. with top quality lowest price

Bevel China in Lviv Ukraine elecon fluid coupling factory Gearboxes in Nizhniy Novgorod Russian Federation rexnord gear coupling manufacturer Feature One Input and One Output Shaft. Our Bevel T Gearboxes Feature One Shaft That Extends From Both Sides of The Body, Forming a T Shape. with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

We offer a full line of Bevel right angle gearboxes. Our standard Bevel gearboxes feature one input and one output shaft; our Bevel T gearboxes feature one shaft that extends from both sides of the body, forming a T shape. We offer a variety of options, including metric and inch shafts, hollow bore units, and gearboxes with one hollow bore and one solid shaft. Hollow bore right angle gearboxes can be fitted with shafts that are larger or smaller in diameter as they exit the gearbox.
Our right angle gearbox lineup includes shaft to shaft, shaft to bore, bore to bore, 2 shaft, 3 shaft, high ratio, and low profile models. All our Bevel T right angle gearboxes are built with a single output shaft extended out both sides of the box, so both ends rotate simultaneously in the same direction.

How Does A Compact Bevel Gearbox Work?

Compact Cubic Gearboxes Videos For Customers Orders

* Malaysia customers bevel 90 degree gearbox 1:1 ratio at 300rpm 600rpm 900rpm 1200rpm 1500rpm speed Video:
https:// /watch?v=MwfmJaiH_4k
* Germany customer spiral-bevel gears 1:1 ratio right angle gearbox with four-way(three output shafts) Video:
https:// /watch?v=wEv8GRmuluo
* Nigeria client 1:1 90° right angle heavy duty gear box, heavy EPT bevel gear box 3 shafts Video:
https:// /watch?v=5aH9zmhpJy0
* Thailand client bevel gear boxes 3:1 ratio JTP140 90 degree transmission gearbox 3 to 1 Video:
https:// /watch?v=BAXXH7X74kc
* Malaysia customer four 10-ton jacks and four JTP140 gearboxes for motorized worm gear screw lift table Video:
https:// /watch?v=z_GpDOLi6Ek
* Australia client screw jack self locking system with inverted 2.5 ton screw jacks and JTP90 gearboxes Video:
https:// /watch?v=DSXcVQg2FB8
* France customer four shaft gearbox 1:1 ratio right angle gearbox four way 22mm 90 degree gear drives Video:
https:// /watch?v=aZyIoBF3T7U
* Indonesia customer reduction gearbox 2:1 ratio right angle EPT bevel gear drive Video:
https:// /watch?v=f-aorIKpP7Q
* USA customer high speed right angle drive 1:1 ratio 90 degree high speed gear boxes Video:
https:// /watch?v=Lc378SwnMCY
* Mexico client JTP65 miniature EPT bevel gearbox 1:1 ratio three way testing Video:
https:// /watch?v=K1GmYyQ6tww
* One input two output gear boxes JTP90 bevel gears 90 gear box dual output Video:
https:// /watch?v=96WMv4VgVtI
* Brazil client JTP110 Two-way Three-way Right Angle Gearbox 1:1 Ratio Video:
https:// /watch?v=PPYO3A4QB-M
* India Faridabad customers JTP110 angel gearbox drive 1:1 22mm shaft 90 degree angle gear boxes Video:
https:// /watch?v=Hv9-LEJ_LRc
* Thailand client 90 degree gear drive box,right ange 1:1 ratio gear reducer Video:
https:// /watch?v=aI_b-2AcCDE
* Canada customer acme screw jack 2 ton travel nut with JTP90 right angle gearbox and safety coupling Video:
https:// /watch?v=MZxQMNY3mmE
* Slovenia client 90 degree gearbox 1:1 ratio, right angle gearbox 1 to 1 ratio Video:
https:// /watch?v=C2ji5jDxEtk
* Brazil client bevel 90 degree gearbox 1:1 test video before shipment Video:
https:// /watch?v=QzgTLFLrBlM
* Turkey customer top quality 25 kn 30×6 spindle rotating trapezoidal thread screw jacks 360mm Video:
https:// /watch?v=WE4s9dXZVoQ
* USA customer inverted screw jack 5 ton with 32mm shaft angle gearbox for 3 points lift system Video:
https:// /watch?v=thLyUWLFt80
* Malaysia customer servo motor driven EPT screw lift system with lifting systems accessories Video:
https:// /watch?v=L7BZidOf_o8
* France customer 5ton screw mechanism for manual table lift/worm gear hand crank raise lower platform Video:
https:// /watch?v=pgSYcd8t3-Y
* Belgium Geel client miniature motorized platform lift,screw lift systems mini jacks gearboxes Video:
https:// /watch?v=fJYWw8Rvo3Y
* Queensland Australia client 6-jacks screw jacking systems with accessories for table lift system Video:
https:// /watch?v=a4m3Gb3G-D8
* 100% safety packages & 100% standard exporting plywood cases materials videos:
https:// /watch?v=9Nqe3mE1CyE

Shipment and Packing Pictures
Shipping:
1. EPT freight: seaport to seaport, price terms CIF, FOB, EXW, CFR etc.
2. Air freight: airport to airport, price terms EXW, CRF etc.
3. Air courier: DHL, FEDEX, UPS, TNT door to door shipment, price terms DDU, CPT etc.
Packing:
100% standard exporting plywood cases.
Note: International Exporting Standard Wooden Material with Free Fumigation.

JACTON Advantages
1. International standard materials for All JACTON brand products. We insist on choosing brand suppliers to supply the high quality raw materials to control the producing process. Optimization constantly the production processes, inspecting in each link and managing production site.
2. 100% quality assured with double quality inspections. The quality inspection by quality inspectors from processing to finished products as the first time. Before packing, the corresponding sales engineers must inspect the orders following the paper drawings, order quantities and special markings in the invoice or sales contracts as the second time. After that, fill in the inspection report with signature and company stamp.
3. 100% safety transportation. Packing with EPT standard export plywood cases materials (free fumigation), inner packing with epe foams to prevent products swaying and outer packing with iron sheets and fasteners to fasten the packages.
4. Internationl sales engineers have professional knowledge and skills on our standard products and service. They have enough ability to solve the basic technical problem immediately whatever by phone, online chat, face to face communications.
5. All the standard products with 2D CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Models (STEP, STP, MODEL, IGS, PRT and CATParT formats).
6. Custom design available, OEM service available, Free engineering advice, Free quotes available and Customer label available.
7. Inspection equipments include motor with inverter drive system, height adjustmemt motorized lifting system, coordinate measuring machines, outside micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, digital noise meters, industrial infrared thermometers, digital speed measuring instruments, digital multimeters, and high precision clamp digital ammeter etc.
8. Processing with modern advanced machines such as CNC gear hobbing machines, CNC flank grinding machines, CNC cylindrical grinding machines, multi-axis CNC milling machines, CNC lathes and others equipments.

Finished Projects
1. Theatrical solutions stage and orchestra platform lifts projects. Customers are from France, Australia, Netherlands, United Kingdom, Spain and Canada.
2. Hydro EPT power station projects and water conservancy projects. Customers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, United States and United Kingdom.
3. Aircraft maintenance platforms and docking systems projects. Customers are from Pakistan, Singapore and United Arab Emirates.
4. Solar panel tracking system projects. Customers are from Spain, India and Canada.
5. Bolted steel storage tanks and silos lifting solutions. Customers are from South Africa, United States, Mexico, Russian Federation, Brazil and Vietnam.
6. Dish antenna elevation and azimuth positioning projects. Customers are from Singapore, Malaysia and United States.
7. Railway wagon projects. Customers are from South Africa.
8. Beverage can production lines. Customers are from Netherlands, United States, Thailand and Indonesia.
9. Steel factories production lines. Customers are from Iran, United States and Turkey.
10. Continuous PU sandwich panel production lines. Customers are from Thailand and United Kingdom.

JACTON Customers Areas(Countries)
1. American Countries: United States, Mexico, Canada, Chile, Xihu (West Lake) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
2. European Countries: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
3. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
4. Oceanian Countries: Australia, New Zealand, Fiji.
5. African Countries: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania.

JACTON Products List
1. Manual Screw Jacks, EPT Screw Jacks.
2. Screw Jacks Series: JT series acme screw jacks, JTC series cubic screw jacks, JTW series machine screw jacks, JTM series worm screw jacks, JTB series ball screw jacks, JTD series cubic ball screw jacks, JSS series stainless steel screw jacks, JTS series bevel gear screw jacks, Non-standard series screw jacks.
3. Bevel Gearboxes Series: JT series bevel gearboxes, JTP series cubic bevel gearboxes, JTA series aluminum bevel gearboxes, JTH series hollow shaft bevel gearboxes, BSS series stainless steel bevel gearboxes.
4. Lifting Systems and Systems Accessories: two-jacks systems, three-jacks systems, four-jacks systems, six-jacks systems, eight-jacks systems. Accessories cover couplings, universal joints, cardan shafts, connecting shafts, EPT motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod end bearings, stop nuts, limit switches, safety nut, travel nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protective tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and position indicators etc.
5. EPT Linear Actuators Series: Parallel heavy duty linear actuators, In-line heavy duty linear actuators.
6. Geared Motors and Speed Reducers Series: helical gearmotors R series, helical bevel gearmotors K series, parallel shaft helical gearmotors F series, helical worm gearmotors S series, small AC gear motor series and worm gear motor reducer series.

Contact Information
JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Capital 500000CNY) is a leading manufacturer and supplier of Screw Jacks (Mechanical Actuators), Bevel Gearboxes, Lifting Systems, EPT Linear Actuators, Gearmotors and Speed Reducers, and Others Linear Motion and Power Transmission Products in China. We are Alibaba, Made-In-China and SGS (Serial NO.: QIP-ASI192186) audited manufacturer and supplier. We also have a strict quality system, with senior engineers, experienced skilled workers and practiced sales teams, we consistently provide the high quality equipments to meet the customers electro-mechanical actuation, lifting and positioning needs. JACTON Industry guarantees quality, reliability, performance and value for today’s demanding industrial applications.
Website (English):
Website (English):
Website (Chinese): cn

Industrial China in Bekasi Indonesia elecon gear coupling sales Vertical in Siliguri India gear coupling hub near me Type Grass Hay Pellet Maker with top quality lowest price

We – EPG Team the most significant couplings and gears factory in China with five different branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

industrial vertical variety grass hay pellet maker

TF Manufacturing facility Introduction:
HangZhou Tongfu Equipment Co.,Ltd is a large-scale new vitality gear manufacturers in China.
Our primary products are pellet mill for vitality sector, feed-things business and we are working with Development Waste Crushing and Recycling Work station.
one)Several years of encounter in pellet equipment generation subject.
2)Accredited ISO9001 and global certificate: CE and SGS.
3)Manufacturing unit audited by SGS.
four)More than a hundred stuff and 50,000sm factory occupation.
5)Specialized in planning, researching, establishing, manufacturing and exporting.
6)Exported to over 20 nations around the world and completed more than a hundred turn-important projects.

TF Services
Reply your inquiry within 24 working hours.
Experienced staffs answer all your question in professional and fluent English.
Customized design is available.
Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers.

We attend Domestic and Worldwide Exhibitions and set up Client Site Going to every calendar year.

Features of Pellet Gas Maker
one.It is broadly used for pelletizing all varieties of biomass particles, such as wooden sawdust, straw, rice husk and espresso husk and so forth.
two.The primary generate adopts the substantial accuracy gear driving, so the output is 20% far more than the belt push.
three.It employs the imported large good quality bearings, oil seal to make confident the higher-effectiveness, steady functionality and minimal noisy of the complete device.
4.The feeder utilizes variable-frequency and variable-pace motor to make confident the great good quality of the pellet.
5.Innovative planet regular compensatory S-shaped coupling with the composition of novel, compact, protected, lower-noisy and low fault.
six.Feeder, conditioner and chute are manufactured of stainless steel with prolonged service daily life.
seven.It is with magnet and more than load protection system, which can safeguard device effectively for the duration of production
eight.We have various bore diameter of the ring dies for your choice. And the feeder is with a variable speed managed to fulfill diverse outputs specifications.
nine.We have oversized conditioner and jacked conditioner for selecting to enhance the impact of the pellet condition.

Application of Pellet Fuel Maker
This pellet machine largely utilised for creating wooden pellets , the pellets utilized for sector, boiler factories.

Different varieties of raw content to make pellet: Raw materials can be any kind of Agro-Forestry waste,like wood log,wooden branch,wood pores and skin,wood chips,stalk,straw,peanut shell,rice husk,and many others.
agricultural squander(wheat stalk,corn stalk,peanut shell,rice husk,straw,and so on.) and wooden squander(scobs,wooden department,wooden chips,wooden shaving,log’s skin,and so forth.)

Output pellet:
the last size could be:Φ6, eight, 10, 12mm, and so on. duration is adjustable,strictly stick to EU Normal.

Specifications of Pellet Gas Maker

Variety	Vertical
Design	MZLV 480	MZLV 480	MZLV 560	MZLV 560	MZLV 560	MZLV seven hundred
Power(KW)	55	75	ninety	one hundred ten	132	160
Potential(T/H)	.five-.6	.9-one	one-one.2	one.5-1.eight	two-2.5	two.5-three
Ring Die(mm)	480	480	560	560	560	seven-hundred
Remark	2 layer ring die. We have 560R(Reducer variety).560G(Equipment variety)

Composition Description of Pellet Gasoline Maker
1.Upward mold. Vertically feeding, by no means buff placer, and easier warmth dissipation
2. Mold vertical, device is less complicated fixing, and secure operating
3.Urgent wheel rotates, and makes supplies centrifugal, evenly spread
4. Double mould, higher and beneath double-use, reduces the cost and increase the performance
five.Cooling system, can make procedure space get enough cooling, which provides defense to machine’s long-time period secure procedure.

We also make Comprehensive Wooden Pellet Manufacturing Line Primarily includes:
1.Crushing approach – Hammer mill
2.Drying approach – Wood Sawdust rotary dryer
three.Pelletizing procedure – wood Sawdust pellet mill
four.Cooling method – Pellet cooling device
five.Packing method – Pellet packing device

Packing&Transport of Pellet Gas Maker
one).Wooden or metal case according to specific size of each Wooden Pellet Making Equipment
we twine thick plastic coating for each Wooden Pellet Producing Equipment.
two).Tight the equipment in the truck without space to ensure no rubbing during the transportation.

FAQ
one) what about the measurement of the last wooden pellet solution?
the dimension is adjustable according to your need.
the diameter range of the wood pellet is ø6-10 mm by making use of different ring die mould.
the length of the wooden pellet could be modified on the equipment.
2) What is the suited dampness (drinking water material) of the uncooked materials that straightforward to make pellet?
the best humidity range is from fifteen% to 18% .
3) will you dispatch engineer to install the wooden pellet machine (generation line)?
Yes. we will dispatch engineer to do the provider just dependent on the prerequisite of buyers.

To provide you very best recommendation and in depth quotation, please enable us know:

one. What is actually the potential you want?
two. What’s the uncooked substance?
three. What is the dimension of the uncooked substance?
4. What is actually the moisture content?
5. What is the closing pellet dimensions do you want?

You should contact us freely to get much more info about the product.
internet:

/ The use of unique tools manufacturer’s (OEM) component quantities or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our organization and the outlined EPT areas contained herein are not sponsored, accredited, or manufactured by the OEM. /

Industrial China in Bekasi Indonesia elecon gear coupling sales Vertical in Siliguri India gear coupling hub near me Type Grass Hay Pellet Maker with top quality lowest price

China in Memphis United States nylon gear coupling shop in Sekondi Takoradi Ghana elecon fluid coupling manufacturer with top quality lowest price

We – EPG Team the biggest couplings and gears manufacturing facility in China with five distinct branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 / With Superior lubrication, the biggest highest bore in the market and vibration damping by as much as thirty% – These are just a couple of factors why industries in building, mining, mixture and much more EPT RexnordEPG Couplings for reputable, tough electrical power transmission for the duration of challenging functions. It truly is one much more way EPG ® will help you help save time, cash and make your work easie shaft gear coupling detailed requirments, we can also create your specific created merchandise. a specialised provider of a entire variety of chains, sprockets, gears, equipment racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes…./ The use of unique equipment manufacturer’s (OEM) part quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our organization and the shown EPT parts contained herein are not sponsored, approved, or created by the OEM. /

China in Memphis United States nylon gear coupling shop in Sekondi Takoradi Ghana elecon fluid coupling manufacturer with top quality lowest price

Precision China in Madurai India falk lifelign gear couplings near me Casting in Toulouse France elecon gear coupling Factory Process Stainless Steel Valves with top quality lowest price

We – EPG Group the largest couplings and gears manufacturing unit in China with 5 various branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Product Identify	Die Casting industrial valves
Valves Processed By	Investment Casting
ValvesProcess Choice	Investment decision Casting Missing Wax Casting Sand Casting Die Casting Metallic Injection Molding
Valves Machining	CNC Machining / Lathing / Milling / Drilling / Turning / Grinding / Shaping / Boring
Valves Warmth Treatment	Normalization / Annealing / Quenching / Tempering / Situation Hardening / Nitriding
Valves Area Finish	Polish / Plating / Coating / Passivation / PVD / Sand Blast
Valves service	OEM available
Valves Substance available	Stainless Metal / Carbon Steel / Alloy Metal / Aluminum / Zinc / Iron / Brass / Alloy
Valves workable	Pro/E, Auto CAD, CAXA UG, CAD/CAM/CAE

About US

EPT Equipment is professional of OEM industrialparts,
OEM fasteners :screw, bolt,nut ,pin,anchor,washer, fittings hangers ects.
Power transmission parts :sprocket,timing belt pulley ,gear ,shaft ,belt pulley ects
Precision CNC parts
Casting elements:fittings,valves ects
Stamping parts

We comply with regular of ISO9001,TS16949 ,SGS,ROHS and we also help do documentation
of PPAP amount 3 for you .Our fasteners and parts are widely utilised in Automobile,creating ,agriculture,
residence appliances,solar,
home furniture,mildew,valve, and numerous other industries.

We have the capacity to machine precision casting components quickly, precisely and competitively.

Kindly send your valuable Purchase Get.

Other precision casting fittings and goods :

FAQ:
one.Could you source valves sample?
Indeed,sample is accessible ,we can pre-create samples according to your drawing .
Mass need to be created following the samples confirmed .

2.Do you assist OEM valves ?
Yes ,OEM is workable .You should let me know your demands and particulars .
Our engineer and product team will aid you to finish .

3.What is actually your Inspection gear of valves ?
We do inspection all by way of the producting.From content to finish.
ur inspection products include Rockwell hardness keep track of and
Vickers hardness monitor,3D picture inspection instrument,torque testing device ,
optical screening machine,substantial-temp tensile testing equipment ects

For any needs of casting valves ,pls feel free of charge to speak to us ,we are listed here for support !

/ The use of unique products manufacturer’s (OEM) component numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our firm and the shown EPT components contained herein are not sponsored, authorized, or created by the OEM. /

Precision China in Madurai India falk lifelign gear couplings near me Casting in Toulouse France elecon gear coupling Factory Process Stainless Steel Valves with top quality lowest price

rigid flange coupling

As one of leading rigid shaft coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid shaft coupling and many other products.

Tag Archives: China gear coupling elecon

Hino China in Erode India elecon fluid coupling supplier Widely in Lodz Poland rubber gear coupling price Used 6X4 380HP 40ton Trailer Tractor Truck with top quality lowest price

Contact information

Industrial China in Bekasi Indonesia elecon gear coupling sales Vertical in Siliguri India gear coupling hub near me Type Grass Hay Pellet Maker with top quality lowest price

China in Memphis United States nylon gear coupling shop in Sekondi Takoradi Ghana elecon fluid coupling manufacturer with top quality lowest price

Precision China in Madurai India falk lifelign gear couplings near me Casting in Toulouse France elecon gear coupling Factory Process Stainless Steel Valves with top quality lowest price