High-Quality Right Angle Gear Drives are created for efficiency, quiet operation, and long service life. SDP/SI offers a broad collection of Right Angle Equipment Drives in various configurations, materials, working speeds, and multiple ratios. Standard catalog products include precision and commercial quality gear drives provided in both inch and metric sizes. For adjustments or custom designs call and talk with a SDP/SI applications engineer.
Our offering includes, but is not limited to the following:
Miniature sized Right Position Gear Drives, 1 inch square, are ideal for compact designs that require low backlash and insight boosts to 2000 rpm.
When weight can be an issue, get Correct Angle Bevel Gear Drives that feature a lightweight casing of PTMT Polyester 30% glass filled, precision floor right angle worm gearbox STAINLESS shafts, sintered bronze bearings and molded nylon gears.
Right Angle Worm Gear Drives accommodate input speeds up to 2000 rpm and so are obtainable in gear ratios: 5:1, 10:1 and 20:1.
Right Angle and Dual Helical Equipment Drives can be found in two models, light-duty, rated boosts to 600 rpm and heavy duty, rated speeds up to 1725 rpm.
An economy series of Right Angle Bevel Gear Drives is offered in 1:1 and 2:1 ratios and rated speeds up to 500 rpm.
E Series Right Angle
The Ever-Power E Series is a high efficiency, right angle gear reducer made for increased torque density, reduced inventory and improved efficiency. By utilizing modified helical-bevel technology, the E Series can operate at 90% effectiveness and can provide up to 60% higher torque than a typical worm equipment reducer. Through various accessories and modular elements, the Electronic Series recreates the essential dimensions of a standard worm gearbox and the opportunity to reduce inventory.
Right-angle Worm Gearboxes
4 sizes available with ratings to 27 HP.
Available in single, dual & triple reduction.
Ratings from 7.8:1 to 59:1.
EP-worm-gearboxsEP Series variants, worm gear family
Ever-Power has been in the forefront of developing gear technology to fill the requirements of our OEM customers. Our close partnerships with our installed customer bottom provided much insight to their evolving need for more high-precision right-position gearing options. In order to fill that require, Ever-Power expanded upon our right angle item offering to include a variety of high-precision worm gearboxes, known as our EP Series.
These servo grade speed reducers are ideal for the most difficult of movement control applications. Each series incorporates a globoidal worm equipment mesh design to be able to achieve the torque handling capability and the highest levels of precision our SHIMPO customers attended to anticipate from us. The insight design of our EP right-angle gearbox applies the same idea of motor modularity that is common across our High Precision item family, meaning our customers and distribution companions get the same degree of flexibility, product variety, and overall availability that is unparalleled within our industry.
Benefits of the EP Series system design;
Quiet operation, compared to other competitive worm gearing
Compact, with precise reduction ratios
High torsional rigidity and torque carrying capacity
A lower life expectancy backlash feature, unique among right-angle gearheads
Industry standard hollow bore output with other shafted options
Extremely lightweight, optimized construction
Maintenance free, lubrication for lifetime
These right-angle servo grade gearboxes are ideal for applications within custom assembly and test systems, packaging equipment, metallic cutting and metal forming machinery, general purpose auto, among numerous others. If the application requires the small footprint of a right-angle worm gear without sacrificing on the efficiency, contact Ever-Power about the EP Series today.
Standard Right Angle Gearbox Features
All ratios built with right-hand worm gears
Load capacity unaffected simply by direction and rotation
Selection of mounting Options
Upon Request:
Left-Hand Gears
STAINLESS Input/Output Shafts
Solid or Hollow Output Shaft
Decide on a Gearbox or Speed Reducer
Worm Gear Acceleration Reducers
sw-1-parent.jpg
SW-1
SWB-5 & SW-5
Right Angle Miter Equipment Drives
miter-gear-parent.jpg
Miter Gear Drives
Mini Right Angle Helical Gear Drives
miniature-right-angle-parent.jpg
RA-200
RA-300
Custom Speed Reducers
custom-speed-reducer-parent.jpg
Custom Speed Reducers
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high input speeds, or when gearmotor performance is important. Contact our technical sales staff for help identifying which gearbox answer is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and invite for a corner convert with optional dual result. The reducers can be found in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting choices providing flexibility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the features of our correct angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes offer a robust solution. The proper angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest procedure of our rate reducers. These gearboxes are designed to deal with varying loads with little backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we have a solution to suit your needs. Our 52 frame size can be available with plastic-type material gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations supply the highest effectiveness and best result torque of most our speed reducers. These gearboxes are created to manage varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options which range from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the best choice for continuous duty applications. Their gear cluster design provides a highly effective method for dissipating heat. Parallel shaft gearboxes possess the shortest amount of our inline gear reducer options therefore they work well in environments with limited space. Our parallel shaft equipment reducers provide an affordable drop-in substitute solution for most little parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, speed reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a gear in the type of a screw, also called a worm, meshes with a worm gear. These gears are usually created from bronze and the worms are steel or stainless steel.
While worm gears act like a spur gear, the worm gearboxes are considerably smaller than other equipment reduction boxes. A principal benefit of worm gear reducers is definitely that they produce an output that is 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox has right hand threads; to change the direction of the output, a left-hands thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
Cast Iron Worm Equipment Reducers can be found in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The systems have a one piece #Fc20 all cast iron housing, NEMA motor quill style input flanges or shaft inputs, come pre-filled with synthetic oil and also have a 12 months warranty.
Features:
Tapered roller bearings upon the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied outside and inside of the gearbox
Air dry special black paint
Product Specifications
OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART NUMBER HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Correct Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR MINUTES) 27
OUTPUT SHAFT THRUST LOAD (Pounds.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1
Ever-Power EP series triple-reduction worm gear rate reducers are available in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes on request). Result torque ranges from 33,000 in lbs. for the 7” CD EP-70 to 582,900 in pounds for the EP-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are ideal for water/waste-water devices drive applications such as thickeners and clarifiers, which need a vertical down shaft. Other obtainable configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or various other process or materials handling systems where huge torques/slower speeds are needed.
These reducers are also obtainable with a helical principal reduction stage and are termed the HDVM series
Enclosed Gears / Gearboxes
Enclosed gears, also called gearboxes or acceleration reducers, are open gears within a housing. The casing supports bearings and shafts, holds in lubricants, and protects the elements from surrounding circumstances. Gearboxes are available in an array of load capacities and quickness ratios.
The purpose of a gearbox is to improve or reduce speed. Consequently, torque output will be the inverse of the function. If the enclosed drive is usually a rate reducer, the torque output will increase; if the drive raises speed, the torque output will reduce. Gear drive selection factors include: shaft orientation, velocity ratio, design type, character of load, gear rating, environment, mounting position, operating temperature range, and lubrication.
Basic Types of Gearboxes
Worm Gear Speed Reducers
A single reduction velocity reducer can achieve up to 100:1 reduction ratio in a little package. Referred to as right angle drives, these consist of a cylindrical worm with screw threads and a worm. With an individual start worm, the worm gear advances only 1 tooth for each 360-degree change of the worm. So, regardless of the worm’s size, the gear ratio is the ‘size of the worm equipment to 1′. Higher decrease ratios can be created through the use of double and triple reduction ratios.
Helical Gear Speed Reducers
Provide high-efficiency speed decrease through 1, 2, 3, or 4 sets of gears. Power is definitely transmitted from a high-swiftness pinion to a slower-speed gear. Helical gears usually operate with their shafts parallel to each other. Both most common types will be the concentric (input and result shafts are in series) and parallel shaft (input and result shafts are offset). Single-stage helical gear reducers are usually used for equipment ratios up to about 8:1. Where cheaper speeds and higher ratios are necessary, double, triple, and quadruple equipment reduction stages can be used.