We – EPG Group the biggest gearbox & motors , couplings and gears manufacturing facility in China with 5 distinct branches. For much more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
Salient Feature:
★The bearing of grinding wheel spindle is 5 plates dynamic sliding bearing, with large carrying ability and rigidity.
★The bearing of regulating wheel spindle is 1:thirty cones integral sliding bearing with high carrying capability and precision.
★The feeding technique geared up servo motor with high precision planetary gear reducer, feeding by means of coupling driving ballscrew.
★The grinding wheel dresser droved by servo motor and ball screw, dressing any steps with no any gauge finder.
★AC frequency converter is used for regulating wheel pace management .
★Hydraulic transmission & stepless velocity regulation are adopted on regulating wheel dresser.
★The equipment operated by 10′ contact screen, car plunge feeding, load, speed, time and measures can be modified.
★Equipped Mitsubishi electrical program.
Principal Application:
The grinder is largely employed for by way of-feed grinding for cylindrical floor of ring-kind and bearing components, as nicely as for guide plunge-lower grinding of
a variety of stepped, cones cylindrical screw surfaces.
Technological information:
| Via-feed | |
| one)Grinding diameter | 5-50mm |
| 2)Grinding length | 120mm |
| Plunge feed | |
| one)Grinding diameter | seven-50mm |
| two)Grinding length | 120mm |
| Grinding wheel technical specs | P400*a hundred and fifty*203mm |
| Regulating wheel specs | PSA300*a hundred and fifty*127mm |
| Grinding wheel speed | 1668r/min |
| Regulating wheel pace(stepless) | 20-200r/min |
| Swiveling angle of regulating wheel | |
| 1)In vertical plane | -2°~ 5° |
| two)In horizontal airplane | 0°~ 3° |
| Feed amount per division of the feed handwheel | .001mm |
| Feed quantity per division of the dresser | .01mm |
| Top from centerline of gri.wheel & reg.wheel to workrest | 220mm |
| Overall electrical power of machine | thirteen.78kw |
| one)Grinding wheel motor | 11kw |
| 2)Regulating wheel motor | one.5kw |
| General proportions | 1920*1681*1479mm |
| Equipment weight | about 2800kg |
| Machining precision | |
| 1)Roundness | .002mm |
| two)Cylindricity | .003mm |
| 3)Surface Roughness | Ra0.32um |
The use of first equipment manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the shown substitute components contained herein are not sponsored, accredited, or produced by the OEM.
