One reduction worm gearing provides high ratio reduction with couple of shifting parts in a close-coupled compact drive. The right angle set up of driving-to-driven machine takes a the least space. Input and output shafts can be extended in either or both directions in horizontal or vertical plans adaptable to any installation requirement. Efficient engine speeds are decreased to gradual speed requirements of several industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive utilization of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and long service life. The hardened floor and polished alloy metal worm develops a easy, work hardened surface on the bronze gear. Because of this worm gears put on in and improve with prolonged service while various other gears are wearing out. Ever-Power offers a wide collection of model configurations, sizes, ratios, and add-ons from our standard product line.
Fabricated Designs
If the application involves severe shock loads or possible housing damage from external sources (as in steel mills or mobile devices applications) Ever-Power can offer fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength which allows the transmission of higher horsepower amounts than are feasible with standard cast iron devices. Extra heavy aspect plates connect the worm and equipment shaft bearing supports, assuring appropriate meshing of the apparatus under all load conditions. In smaller sized sizes, fabricated steel reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can offer custom quickness and reversed engineered reducers for the application, be it a fresh project or a primary drop-in alternative to a competitor’s speed reducer. Fabricated steel reducers enable Ever-Power to complement a competitor’s footprint, centerline, and shaft elevation allowing a direct drop-in alternative saving the customer time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our design also includes a hardened, surface and polished alloy steel worm. This combination develops a smooth, work-hardened mating surface area of the bronze equipment which boosts with prolonged service.
Worm gearing is a course of equipment reducers that utilizes right angle, nonintersecting shafts. This form of reducer provides simple and quiet procedure and permits the probability of large swiftness reductions. These gears can be found from share in a wide variety of ratios, from only 4:1 up to 3600:1. The compact design and construction allows worm equipment reducers to be positioned in a comparatively small space. Thus, high reductions in a restricted package size may be accomplished with this configuration. Our worm gear features the constant sliding tooth actions between worm and the teeth. This increases the tolerance for large loads and shock loads. Worm gear drives offer users high reducing capacity for relatively low cost in comparison with some other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox worm gear speed reducer series bottom on years of encounters uses designed teeth surface area with unsurpassed torque transfer efficiency with great functionality, efficency and price.Worm gear system transmits power through sliding get in touch with, resulting in extremely low vibration , noise, little backlash and self-locking property
-Housing:One time we casting creats great rigidity for serious impacts. Outer cooling fins and inner lubrication oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one kind of reduction gear box which includes a worm pinion insight, an output worm gear, and features a right angle result orientation. This kind of reduction gear container is generally used to have a rated motor acceleration and create a low speed output with higher torque worth based on the decrease ratio. They often times can resolve space-saving problems since the worm equipment reducer is one of the sleekest decrease gearboxes available due to the small diameter of its output gear.
worm gear reducerWorm equipment reducers are also a popular type of speed reducer because they provide the greatest speed reduction in the smallest package. With a high ratio of speed decrease and high torque result multiplier, it’s unsurprising that many power transmission systems make use of a worm gear reducer. Some of the most typical applications for worm gears are available in tuning instruments, medical tests equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm equipment reducer, the SW-1 and the SW-5 and both are available in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with rugged compression-molded glass-fill polyester housings for a long lasting, long lasting, light-weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer a choice of a good or hollow output shaft and feature an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can endure shock loading better than other decrease gearbox designs, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also known as worm gearbox or worm velocity reducers. Worm gear reducers are used for speed reduction and increasing the torque for electric powered motor drives. You can decide to install your NEMA electric motor to the reducer by using the NEMA C face flange or use a coupling. If you need a coupling for the result or input shaft find our coupling section for choosing the coupling. We offer four assemblies left hand and right hand and double result shaft and shaft input and shaft output. Interchangeable with the majority of worm gear manufactures. Discover data sheet in product overview for diamensions. If you don’t see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear quickness reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are well suited for water/waste-water gear drive applications such as for example thickeners and clarifiers, which need a vertical straight down shaft. Other offered configurations also make Ever-Power triple reduction reducers perfect for use on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or components handling systems where large torques/slow speeds are needed.
These reducers are also offered with a helical major reduction stage and are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow swiftness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C or 145TC flange install with either right, left or dual output shafts or a hollow bore output. The indirect drive versions are shaft input-shaft result boxes for use with sprocket or pulley drive systems. They offer an effective low cost solution to speed reduction and improved torque, with higher tolerances for shock loading than helical gear reducers.
In order to select a gearbox speed reducer, you will have to determine the required torque and services factor for the application form. Click on “Specifications” above for a table that will aid in determining the service factor. For service elements above 1.0, multiply the mandatory torque by the service factor.
Our regular 700 Series – the heart of Ever-Power quickness reducer products – has been serving industry reliably for over 40 years. Its proven modular design has set the sector standard for overall performance and may be the most imitated product in the current worm gear acceleration reducer marketplace. But why accept a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without exterior ribs, is made from close-grained cast iron and for rigid equipment and bearing support. In addition, it offers excellent warmth dissipation.Dual lip, spring-loaded seals protect from oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater power.High tensile strength cast bronze worm wheel and hardened and floor alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Essential oil sight gauge for simple maintenance (unavailable on sizes 25 and 34).Factory oil stuffed.Every device test run prior to shipment.Universal mounting with bolt-on foot.Highly modifiable design.All this at substantially reduce prices than you have already been accustomed to paying for reducers of lesser quality. Less