Electrical power UNITS FOR DOUBLE-SCISSORS LIFT

Common Description
Outfitted with the zero leak bidirectional checking sole-noid valves, this electrical power unit is intended for your operation of two independent circuits. Which are respectively for your key and subordinate platforms from the double scissors lift. Two cut-off valves are employed for reducing the machine manually in situation of power reduction. If more independent circuits are required for the application please speak to us for availability.
Remark: one. Please seek advice from our income engineer for your distinctive pump displacement, motor power or tank capability.
2. CSA or UL certified motors are available on request.
Particular Notes
one. The AC motor is of S3 duty cycle, which might only get the job done intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean every one of the hydraulic parts concerned prior to set up of the electrical power unit.
three. Viscosity of your oil shoud be 15~46 cst,as well as the oil ought to be clean and no cost of impurities,N46 hydraulic oil is proposed.
four. The electrical power unit should be mounted vertically.
5. Check the oil degree while in the tank soon after the first operating on the power unit.
6. Oil modifying is needed right after the preliminary a hundred operation hrs,afterwards when each 3000 hrs.