{CLR.Field id="cone" fieldname="Title" /}_Ever-Power Machinery Manufacturing Co., Ltd.

current position:Home > Product display>> Slider coupling >
WH slider coupling

WH slider coupling

SliderCouplingIt is a commonly used component in mechanical products, used to connect two shafts or shafts and rotating parts, and in the process of transmitting motion and power, they rotate together without disengaging or changing the direction of rotation. Torque; some couplings also It has the functions of compensating the relative displacement of the two axes and damping vibration.In addition, some couplings can also double as a device to prevent overloading of the drive shaft
JMI diaphragm couplingMLZ type single flange plum blossom elastic couplingFlexible elastic coupling

     Coupling is a commonly used component in mechanical products. It is used to connect two shafts or shafts and rotating parts, and in the process of transmitting motion and power, they rotate together without disengaging and without changing the direction of rotation. What is the amount of torque; The shaft device also has the functions of compensating the relative displacement of the two shafts and damping vibration.In addition, some couplings can also double as a device to prevent overloading of the drive shaft.
     With the development of industry and science and technology, the application of machinery in modern industry continues to expand, its types continue to increase, and the requirements for its performance are getting higher and higher.In order to improve the efficiency and reliability of the mechanical device, it is very important to ensure that the parts of the machinery, which are the couplings, are of high quality.Therefore, although there are many serialized and standardizedCouplingHowever, due to the various types of machinery, and their different loads, speeds, and working environments, there is no need for various side axles with different performances to adapt to different working conditions and performance requirements.For this reason, Jindun Machinery keeps researching new couplings.Improve the original coupling to meet the needs of users.
     The slider coupling is very similar to the cross slider coupling. The difference is that the cross slider in the middle is a square slider. The middle slider is used to slide in the corresponding radial grooves on the end faces of the half couplings on both sides. In order to realize the coupling of the two halves of the coupling.The coupling has low noise, high efficiency, and slow wear. It is especially suitable for low-speed occasions.

 Basic parameters and main dimensions of WH slider coupling

model
Nominal torque Tn(Nm)
Allowable speed [n]r/min
Diameter of shaft hole
Length of shaft hole
D
D1
B1
B2
l
Moment of inertia Kg.m2
Mass kg
d1 d2
Y
J1
L
mm
WH1
16
10000
10,11,12,14
25-32
22-27
40
30
52
13
5
0.0007
0.6
WH2
31.5
8200
12,12,16,(17),18
32-42
27-30
50
32
56
18
5
0.0038
1.5
WH3
63
7000
16,(17),18,20,22
42-52
112
70
40
60
18
5
0.0063
1.8
WH4
160
5700
20,22,24,25,28
52-62
112-142
80
50
64
18
8
0.013
2.5
WH5
280
4700
25,28,30,32,35
30-38
84
100
70
75
23
10
0.045
5.8
WH6
500
3800
30,32,35,38,40,42,45
38-44
84-107
120
80
90
33
15
0.12
9.5
WH7
900
3200
40,42,45,48,50,55
62-82
172-212
150
100
120
38
25
0.43
25
WH8
1800
2400
50,55,60,63,65,70
82-112
172-212
190
120
150
48
25
1.98
55
WH9
3550
1800
65,70,75,80,85
44-60
132-167
330
190
180
58
40
4.9
85
WH10
5000
1500
80,85,90,95,100
60-84
132-167
330
190
180
58
40
7.5
120
Note: 1. The mass and moment of inertia of the coupling in the table are approximate values ​​calculated based on the diameter of the small shaft hole and the large length.
2. Try not to select the values ​​in parentheses.

 

Previous:Slider coupling
Next article: No more!