{CLR.Field id="cone" fieldname="Title" /}_Ever-Power Machinery Manufacturing Co., Ltd.

Roller chain coupling

Roller chain coupling

Roller chainCouplingIt has the hardness of steel, good corrosion resistance and environmental protection performance of the roller chain coupling.
JMI diaphragm couplingMLZ type single flange plum blossom elastic couplingFlexible elastic coupling

  Roller chainCouplingIt has the hardness of steel, good corrosion resistance and environmental protection performance of the roller chain coupling.Roller chain coupling ultra-dense processing machine tools can achieve the required degree, but due to the special structure of the roller chain coupling, guide rail, and spindle due to ultra-dense processing, this type of machine tool is not only expensive, but also has a small stroke, The disadvantages of low cutting efficiency and long clamping time make it difficult to meet the needs of mass production of larger workpieces.The integral rolling lining has no joints (ETFE lining thickness is 2~5mm), which can withstand various concentrations of acids, alkalis, salts, strong hydrogenating agents, organic compounds and all other strong corrosive chemical media (corrosion resistance and PTFE the same).

  The roller chain coupling is an ideal product to solve the difficult corrosion problems of high-temperature dilute sulfuric acid, hydrofluoric acid, hydrochloric acid and various organic acids. It is resistant to positive and negative and vacuum, alternately changing between cold and heat, and the lining is not affected. It can be solved The problem of delamination of PTFE lined sheet equipment is that one of the defining characteristics of high processing is that in addition to the tolerance range, the size and batch size of the parts are also considered.Maintain a tolerance of 5μm when processing large quantities of parts, and maintain a tolerance of 2μm when machining two matching parts, or use a small diameter end mill to process on a machine tool with a positioning degree of 0.3μm, etc., all belong to the category of high-density processing. .In other words, the size of the part and the batch size of the workpiece determine the difficulty of achieving certain specific tolerances.

model
Nominal torque Tn Nm
Speed ​​r/min
Axle hole diameter d1, d2 
Length of shaft hole
Chain number
Number of teeth Z
Pitch P
D
S
Dk max
Lk max
No cover
With hood
L
L1
GL1
40
1400
4500
16-20
42-52
38
06B
14
9.525
51.06
4.9
70
70
GL2
63
1250
4500
19-24
42-52
38
06B
16
9.525
57.08
4.9
75
75
GL3
100
1000
4000
20-25
52-62
38-44
08B
14
12.7
68.88
6.7
85
80
GL4
160
1000
4000
24-32
52-82
44-60
08B
16
12.7
76.91
6.7
95
88
GL5
250
900
3150
28-40
62-112
60-84
10A
16
15.875
94.46
9.2
112
100
GL6
400
630
2500
32-50
82-112
60-84
10A
20
15.875
116.57
9.2
140
105
GL7
630
630
2500
40-60
112-142
84-107
12A
18
19.05
127.78
10.9
150
122
GL8
1000
500
2240
45-70
112-142
84-107
16A
16
25.40
154.33
14.3
180
135
GL9
1600
400
2000
50-80
112-172
107-132
16A
20
25.40
186.20
14.3
215
145
GL10
2500
315
1600
60-90
142-172
107-132
20A
18
31.75
213.02
17.8
245
165
GL11
4000
250
1500
75-100
142-212
107-167
24A
16
38.1
213.49
21.5
270
195
GL12
6300
250
250
85-120
172-212
132-167
28A
16
44.45
270.08
24.9
316
205
GL13
10000
200
1120
100-140
212-252
167-202
32A
18
50.8
340.80
28.6
380
230
GL14
16000
200
1000
120-160
212-302
167-242
32A
22
50.8
405.22
28.6
450
250
GL15
25000
200
900
140-190
252-352
202-228
40A
20
63.5
466.25
35.6
510
285
 

Previous post: No more!
Next:GL roller chain coupling