{CLR.Field id="cone" fieldname="Title" /}_Ever-Power Machinery Manufacturing Co., Ltd.

current position:Home > Product display>> Rigid coupling >
JQ type clamp coupling

JQ type clamp coupling

JQ type sandwich shellCouplingWhen assembling and disassembling, the shaft does not need to move axially, so the assembly and disassembly are very convenient. The disadvantage of the clamp housing coupling is that the axis of the two shafts is low, the structure and shape are more complicated, the manufacturing and balance are low, and it is only suitable for low speeds. And occasions where the load is stable.
JMI diaphragm couplingMLZ type single flange plum blossom elastic couplingFlexible elastic coupling

  JQ type sandwich shellCouplingWhen assembling and disassembling, the shaft does not need to move axially, so it is convenient to assemble and disassemble. The shortcomings of the clamp housing coupling are that the axis of the two shafts is low, the structure and shape are more complicated, the manufacturing and balance are low, and it is only suitable for low speeds. When the load is stable, the linear velocity of the outer edge is usually not more than 5m/s. When the linear velocity exceeds 5m/s, a balance check is required.In order to improve the balance, the bolts should be installed between the forward and reverse phases.Jacketed couplings do not have axial, radial and angular compensation performance.
The characteristics of the vertical clamp coupling are similar to those of the clamp coupling, simple structure, easy to assemble and disassemble, suitable for low speed (high peripheral speed of XNUMXM/S), no impact, and stable vibration load. For the connection of vertical shafts such as agitator.
The clamp shell coupling uses two clamp shells split along the axial direction, which are clamped by bolts to realize the connection of the two shafts. The torque is transmitted by the friction between the two halves of the coupling surface, and the flat key is used as an auxiliary connection.
The JQ type jacketed coupling is used for the reactor agitating shaft is too long, and the two agitating shafts are connected when it is manufactured in two stages. If the output shaft of the vertical reducer is connected with the reactor agitating shaft, the jacketed coupling should be used when ordering Proposed in order to use non-standard requirements for the output shaft size.